Lubrication for pipes
and additives for road surfaces
reinforcing the durability and resistance of infrastructures
Télécharger
Fatty acid purified, sulphated and treated to give it a delayed solubility property.
Lubricant designed to facilitate the fitting of all PVC pipes and fittings with rubber joints where the adhesion of the paste to a smooth body is delicate.
White paste in foam form offering good visibility on black joints.
Delayed dissolution to withstand rain and stagnant water. AB153 paste can be completely removed when the pipe is rinsed.
AB153 paste has been tested by an independent laboratory. It meets the specifications of standard NF EN 681-1: 1996, in terms of volume variation in oil and hardness on SBR rubber after ageing at 70°C. AB153 Paste is therefore harmless to rubber joints and guarantees the durability of assemblies in accordance with the requirements of standard NF EN 1916: 2002.
The components of AB153 paste belong to the families of products listed in brochure No. 1227 on materials in contact with foodstuffs and cleaning products for these materials.
Do not store for longer than 12 months. Store away from temperatures above 30°C.
1 and 2.5 litre buckets
A speciality soap made from selected, pre-treated vegetable and animal fats.
Lubrication of rubber joints for all pipework diameters (concrete, cement, PVC, cast iron, stoneware, etc.).
| Parametres | Specifications |
|---|---|
| Appearance at 20°C : | Soft dough |
| Appearance at 60°C : | Liquid |
| Color: | Light beige |
| Fragrance: | Characteristic |
| pH at 20°C : | 10 to 10% in demineralised water |
| Viscosity at 20°C : | > 5000 cP |
| Density at 20°C : | 1 |
| Dry Extract : | > 40% |
| Olubility in water | Dispersible |
Lubricant specially adapted for laying pipes in damp environments, significantly reducing the forces required to fit them together.
Fully biodegradable.
S3F Paste has been tested by the Laboratoire National d’Essais. It meets the specifications of standard NF EN 681-1: 1996, in terms of volume variation in oil and hardness on SBR rubber after ageing at 70°C. S3F Paste is therefore harmless to rubber joints and guarantees the durability of assemblies in accordance with the requirements of standard NF EN 1916: 2002.
Lubricant application varies according to the type of pipe, but as a general rule, the joint and the spigot end should be thoroughly lubricated.
Avoid storage for longer than 12 months and temperatures above 50°C (product liquefies).
Not affected by frost (no change in performance in extreme cold).
5L buckets.
Potassium soap made from selected, pre-treated vegetable and animal fats.
Lubrication of rubber joints for all pipework diameters (concrete, cement, PVC, cast iron, stoneware, etc.).
| Parameters | Specifications |
|---|---|
| Appearance at 20°C : | Soft dough |
| Appearance at 60°C : | Liquid |
| Color: | White to yellowish |
| Fragrance: | soap |
| pH at 20°C : | 10 à 10% in demineralised water |
| Viscosity at 20°C : | > 5000 cP |
| Density at 20°C : | 1 |
| Dray extract : | > 40% |
| Solubility in water | Dispersible |
Lubricant specially designed for laying pipes in damp environments, to significantly reduce jointing forces. Water-soluble at 20°C, specially designed not to alter the natural qualities of rubber.
Fully biodegradable.
S3F-A Paste has been tested by an independent laboratory. It meets the specifications of standard NF EN 681-1: 1996, in terms of volume variation in oil and hardness on SBR rubber after ageing at 70°C. S3F-A Paste is therefore harmless to rubber joints and guarantees the durability of assemblies in accordance with the requirements of standard NF EN 1916: 2002.
Lubricant application varies according to the type of pipe, but as a general rule, the joint and the spigot end should be thoroughly lubricated.
The components of S3F-A paste belong to the product families listed in brochure No. 1227 on materials in contact with foodstuffs and cleaning products for these materials.
Avoid storage for longer than 12 months, frost and temperatures above 40°C.
1-litre, 2.5-litre, 3-litre and 5-litre buckets.
Speciality based on soap, natural plant materials and mineral derivatives.
Lubrication of rubber joints for all pipework diameters (concrete, cement, PVC, cast iron, stoneware, etc.).
| Parameters | Specifications |
|---|---|
| Appearance at 20°C : | Compact paste |
| Color: | Grey |
| Fragrance : | Characteristic |
| pH at 20°C : | slightly alkaline |
| Dry extract : | > 85% |
| Solubility in water | Dispersible |
ST2 Paste is a lubricant specially designed for laying pipes in damp environments, to significantly reduce jointing forces.
The organic part of the product is entirely biodegradable.
Pâte ST2 has been tested by the Laboratoire National d’Essais. It meets the specifications of standard NF EN 681-1: 1996, in terms of volume variation in oil and hardness on SBR rubber after ageing at 70°C. Paste ST2 is therefore harmless to rubber joints and guarantees the durability of assemblies in accordance with the requirements of standard NF EN 1916: 2002.
Application of the lubricant varies according to the type of pipe, but as a general rule, the joint and the male end of the pipe should be thoroughly lubricated.
Temperature range: – 3°C to 40°C.
Close the bucket tightly after use.
Avoid storage for longer than 12 months and extreme temperatures above 50°C (product liquefaction).
Not affected by frost.
A slight coloured liquid supernatant may appear on the surface over time, but this does not alter the lubricating properties of ST2 Paste. The product should be mixed gently before use.
5-litre buckets.
Packaging, Logistics Management and Optimisation
Packaging at Steverlynck is adapted to the specific characteristics of each product, ensuring stability and longevity through the choice of appropriate packaging. Filling, labelling and sealing procedures are rigorously controlled, ensuring accuracy and conformity. At the same time, logistics is a key component, encompassing stock management, shipment scheduling and synchronisation with transport networks. Tracking systems are deployed to optimise distribution and meet delivery deadlines.
Collaboration and technical support with customers
Steverlynck emphasizes active collaboration with its customers, offering targeted technical support and adaptability to diverse demands. This approach aligns Steverlynck’s solutions with the concrete needs of its partners.
Custom Product Design
Product customisation is a priority. Each formulation is adapted to meet the specific requirements of customers, offering solutions that correspond directly to their needs.
Innovation in response to changing customer expectations
Product customisation is a priority. Each formulation is adapted to meet the specific requirements of customers, offering solutions that correspond directly to their needs.
Commitment to Constant Quality Monitoring
Steverlynck’s emphasis on quality monitoring reflects its commitment to maintaining high standards. Through continuous monitoring and systematic evaluation, the company aims to ensure the conformity and reliability of its products.
of its products.
Treatment of corks
Solutions comprising anti-mould agents and food-grade lubricants, improving the conservation and use of cork stoppers.
Solutions for public works
Lubricating pastes for pipes and additives for road surfaces, enhancing the durability and resistance of infrastructures.
Detergent & soap chemical solutions
A range of detergents and soaps for industrial cleaning, combining effectiveness, respect for the environment and adaptability.
Chemical specialities in textiles and leather
Solutions for treating, finishing and dyeing textiles and leather, improving quality, durability and aesthetics.
Expertise and innovation in tailor-made chemical formulations
Development of customised chemical solutions for a range of applications, from pharmaceuticals to paints and agrochemicals.
French industrial chemicals tailored to your needs
Message envoyé
Discover innovative solutions for public works with a range of industrial lubricants and mould release agents. These products are specially designed to facilitate the installation and demoulding of PVC or concrete pipes and ducts, helping to increase the efficiency of construction and infrastructure sites.